DIY Home: fabulous fabric and the $15 ottoman

One of the most useful things we purchased when we had our Little Miss was a “nappy caddy” which holds nappies, cream, nappy bags and other bits and pieces.  We can carry it around the house and change our little wriggle monster where ever she is.  However, as you can imagine, this item is not super stylish and not the type of thing I like to have on display.  So…I needed a storage solution and preferably one that was quick, easy and cheap.  A $15 storage ottoman from Officeworks seemed to fit the bill.  However, it needed a bit of a style up.  Here is how I did it…

How to cover a faux leather ottoman with fabric

The supplies:

* Plain storage ottoman

Fabric covered ottoman01

Fabric covered ottoman02

* Fabric – enough to cover the ottoman.  A strong cotton canvas or other upholstery fabric is best.

Fabric covered ottoman03

* Fabric scissors

* Staple gun & staples.  I used this battery operated Bosch staple gun, however a heavy duty tacker gun (similar to this one from Bunnings) is likely to also do the trick, depending on your strength and the materials the ottoman is made of)

Staple gun

* Cotton tape – at least 2.5cm wide (optional)

Cotton tape pink

* Glue gun (optional)

Glue gun

* Scotchgard, or similar spray fabric protector (optional)

IMG_8890

The method:

1. Cut fabric for the lid. Place the ottoman lid on the fabric and cut around with a generous margin that will allow you to wrap the fabric around each edge and attach it to the inside.  Tip: place the fabric so the “good side” is showing so that you can see approximately what print will show on the ottoman’s lid.  Make sure you turn the fabric over before you start to “wrap” the lid so that the good side of the fabric ends up on the outside!

Fabric covered ottoman04

2. Attach fabric on two opposite sides of the lid.  Wrap the fabric around one edge of the lid (see notated photo below for what I am calling “the edge”).  Using the staple gun, attach the fabric to the inside of that edge.   Repeat for the opposite edge.

The edge

Stapled lid1

3. Attach fabric on the remaining opposite edges. Fold the fabric as if you are wrapping a gift and wrap the fabric around the edge.  Attach fabric to the inside of the edge using the staple gun.  Repeat on opposite edge.  Your lid will now be covered.

Fabric covered ottoman05

Fabric covered ottoman08

Fabric covered ottoman09

Fabric covered ottoman10

4. Cut out a strip of fabric to cover the base of the ottoman.  Your next strip of fabric will need to be wide enough to cover the side of the ottoman and, ideally, it will be long enough to wrap around the ottoman once with a bit of an overlap to make a neat join.  However, if your piece of fabric is not long enough simply follow the instructions in step 6 and use overlapping pieces of fabric.

Fabric covered ottoman12

5. Wrap and staple.  Wrap the fabric around the ottoman and attach it to the inside of the ottoman using the staple gun. as you wrap.  Tip: For a neater join, start the fabric halfway across the side of the ottoman, rather than at a corner.

Fabric covered ottoman15 Fabric covered ottoman14

6. Create a neat join.  Continue to wrap and attach the fabric to the inside of the ottoman until your fabric wraps all the way around and overlaps the beginning of the fabric.   To create a neat join, simply fold over the edge of the remaining fabric and attach with the staple.

Fabric covered ottoman16

Fabric covered ottoman17

Fold over hem

7. Grab a friend. If your ottoman has a softish base, like mine, for this next part I advise asking a friend for help.  However, if the ottoman’s base is sturdy you should be able to continue without help.

8. Attach the fabric to the base of the ottoman. Turn your ottoman upside down.  Once again wrap the fabric over the lip of the side and hold tight while a friend aims the staple gun and attached the fabric (thanks husband and brother-in-law for helping me out so I could take a picture!)  You will now have a covered ottoman.

Fabric covered ottoman22 Fabric covered ottoman23

Fabric covered ottoman21

Fabric covered ottoman20

8. Optional – cover the staples with some cotton tape.  To keep the join between the stapled fabric and the ottoman neat I decided to glue some simple cotton tape over the join and staples.  Completely optional and, obviously, once the lid is closed you can not even see it!  Glue down the cotton tape along the join using a glue gun.  Tip: Start the cotton tape in the middle of the side of the ottoman for a neater join.

Fabric covered ottoman24

Fabric covered ottoman25

Fabric covered ottoman26

9. Optional – Create a neat join.  To create a neat join cut the cotton tape in an arrow shape, as shown below.  Fold the arrow shape under itself and glue down.

Fabric covered ottoman27

Fabric covered ottoman28

10. Optional – protect the fabric. Spray your ottoman with Scotchgard or similar spray fabric protector.  I recommend two coats.  Tip: spray protectors have a horrible odour so its best to spray outdoors.

11. Admire your newly covered ottoman!

Fabric covered ottoman30

Fabric covered ottoman29

Fabric covered ottoman31

Fabric covered ottoman32

Fabric covered ottoman33

Fabric covered ottoman35

Fabric covered ottoman34

xxCatherine_PNG72ppi

The details – project:

* Ottoman – Storage ottoman, white ($15), Officeworks

* Fabric – we used the gorgeous dot fabric from Edit (look out for their pop up store at Shop 1, 92 Queen Street Woollahra) in cotton canvas, however any cotton canvas or upholstery fabric would work well.

* Staple gun – a variety of staple guns are available from most hardware stores, in Australia your best bet is Bunnings.

* Cotton tape – fuchsia 1.5 inch cotton tape, purchased from No Chintz, also available from Spotlight for around AU$1.50 per metre.

* Glue gun and stick glue – similar available from Spotlight.

* Spray fabric protector – Scotchgard, available from most hardware stores.

The details – photos:

* Nappy caddy – b.Box Essential Nappy Caddy ($69.95), available from Baby Village.

* Chevron mat – bath mat, West Elm (used as a door mat at our back door).

* Armchairs – Oz Design Furniture.

* Throw cushions (from left) – catherineandgrace DIY using Edit giraffe fabric; Edit cushion in Edit dots fabric; Edit cushion in Edit giraffe fabric.

* Throw rug – chunky tassel throw in Blue Fin, West Elm.

* Silver flats – Belle by Sigerson Morrison, purchased at Quincy.

* White tray – rattan square tray from The Design Hunter, customised by catherineandgrace.

* Magazines – Autumn and Winter 2013 issue of fete magazine, Fete Press.

DIY Nursery: Change up that change table

Every nursery needs a change table, give yours a bit of personality with this simple style-up.

Supplies:

* Your change table with knobs or handles

* A screwdriver to match the types of screws used on the original knobs/handles and the new knobs/handles (usually a standard size phillips head screwdriver)

* Shiny new knobs or handles!

IMG_7462

Method:

1. Choose your change table.  We chose a simple white change table from Baby Kingdom in Alexandria (the Grotime Kimberley for those who are interested!).  I like that it allowed us to remove the change table part once we have finished with it to become an ordinary chest of drawers.  For the mums & dads – it also has some safety features to prevent it toppling over onto curious little ones, but that’s a whole other post!

I nursery - change table in shop

2. Chose your new knobs or handles.  We purchased shiny crystal knobs from That Vintage Shop in Marrickville.  The knobs are priced around $7-11 each.

3. Unscrew original knobs from the inside of the draw.

IMG_0781

IMG_7465

IMG_7463

4. Screw in the new knobs again from the inside.

IMG_7464

IMG_7466

IMG_7467

5. Admire your customised changed table!

I nursery - change table

xx catherine and grace

The details:

* White change table – Grotime Kimberley, from Baby Kingdom in Alexandria

* Crystal knobs – That Vintage Shop

* All other nursery items – see Nursery styling part #2

Nursery styling part #1 – white furniture forms a base

We are lucky enough to have built in cupboards across one entire side of the nursery.  When we purchased the house they were a horrible fading pine colour, however the actual doors and shelves themselves were in fantastic nick.  We decided to have the entire built in wardrobe painted in a gloss effect in Wattyl’s White Delight (the same colour as the skirting, architraves, doors and windows frames).  We kept all large furniture items (other than a comfortable chair for nursing) in white – perhaps to be used in a boys room one day(?!?) and allowed us to style the remainder of the room in bright colours for our little girl.  Once the cot, change table, nursing chair & side table were in place I was able to visualise the room and get going on the fun part!

.

IMG_1728

.

IMG_1732

.

I nursery - change table

.

IMG_7440

.

I nursery - side table

.

 

xx catherine and grace

The details:

* Grey fabric storage cubes – Papaya

* White & black photo frames – RIBBA frames from Ikea

* Cot – Stoke Mini available from Baby Village (by far, in my opinion, the most outstanding children’s furniture and equipment store in Sydney – extremely knowledgable staff, a wide range of products in various price points, including the top of the range in any product type, as well as good prices and great sales)

* Change table & change mat – Grotime Kimberly in white purchased from Baby Kingdom

* White gloss floating shelves above fireplace & change table – Bunnings

* Replica Philippe Starck Louis Ghost armchair in clear – available from from Matt Blatt

* White & grey side table – old pine bedside table customised by catherine and grace with Wattyl’s White Delight & Snowdonia interior paint finished with a clear gloss and crystal knobs (see related post).

* Grey nursing armchair – purchased from Oz Design Furniture (see similar designs here)

* For details on all other items see Nursery Styling part #2

 

%d bloggers like this: